Coating Supervisor Technip

technip

TECHNIP is a leading provider of Engineering, Project Management and Construction services for oil and gas, petrochemical and other industries.

As part of our business expansion in Indonesia, we are seeking highly qualified professionals to fill in the position of Painting/Coating Supervisor based in Minas, Sumatera.

PAINTING/COATING SUPERVISOR – MINAS

The Scope of Work entails:

  1. Review of coating / painting procedures and witness painting procedure qualification tests.
  2. Monitoring painting activity and the parameters like relative humidity, dew point and substrate metal temperature.
  3. Check surface preparation after blasting operations, WFT / DFT and ensure the values are as per the requirement. Report non-conformances as required especially when Quality Control deficiencies are noted.
  4. Review of paint batch certificates and MSDS data sheets.
  5. Monitoring all the project related painting activities in yard and as well in fabrication shops. Co-coordinating with paint Manufacturer s technical representatives on painting activities.
  6. Inspection of insulation works and associated cladding works.
  7. Assist lead QC in vendor assessment works.
  8. Participate in painting audit works and spot audits.
  9. Interface with other contractors and vendors on painting and insulation works.
  10. Field co-ordination with yard contractor s QAQC team in implementation of QC measures.

Job Requirements:

  • Must possess minimum Vocational certificate from a recognized, fully accredited Inspection Body in Indonesia or Overseas. Qualified to NACE / BGAS painting inspector level II or equivalent Indonesian certification.
  • Minimum of 5 years post-qualification experience in painting inspection and / or painting supervision works in Oil and Gas Construction/Fabrication works.
  • Shall have good written and spoken English language communication skills.
  • Should be a fast learner and a team worker.

Interested applicants should submit the application letter and CV to hrd.indo@technip.com with detailed resume and recent photograph; and put the “Painting Supervisor” on the subject email.

Leading provider of Engineering, Technologies and Construction services for oil and gas, petrochemical and other industries, within its 22,000 people worldwide.
Now seeking highly qualified professionals to fill in position listed below:

SENIOR TAX SPECIALIST

Job Requirements:

  • Experience: 3 – 5 years experience in the related field / MNC Company, preferably from Reputable Tax Consulting Firm.
  • Bachelor Degree in Accounting / Fiscal.
  • Familiar with e – SPT and accounting software.
  • Strong practical knowledge of Indonesian Tax Regulation.
  • Having experience in Tax Audit, Tax Objection, Tax Appeal.
  • Hold Tax Brevet A, B, C (preferably from IKPI).
  • Good command of English both spoken and written.
  • Hard work and able to work as a team.

Interested applicants should submit the application letter and CV to hrd.indo@technip.com with detailed resume and recent photograph; and put the “Senior Tax Specialist” on the subject email.

TECHNIP is leading provider of Engineering, Technologies and Construction services for oil and gas, petrochemical and other industries.
As part of our business expansion in Indonesia, we are seeking highly qualified professionals to fill in position listed below.

SENIOR PROJECT CONTROLS ENGINEER

Job Responsibilities:

  1. Prepare and monitor a CPM schedule for the project.
  2. Do Performed sensitive analysis on the CPM schedule and corrective action to be taken.
  3. Prepare plan and monitor cost to identify the cost and cash flows.
  4. Do sensitivity analysis on the estimates and cash flow forecast.
  5. Cost Control.
  6. Contract Administration (in related with CLIENT): Contracting strategy, Estimate price, provide contract agreement packages, negotiation, payment monitoring status, controlling contract status and prepare additional work claims, coordinate with technical team to prepare insurance requirement and contract perform.
  7. Subcontractor Administration (subcontracting strategy, estimation price and ensure with technical team for scope of work, prepare subcontract agreement packages, review proposal price and negotiation, payment monitoring status and control subcontracting status).
  8. Procurement Activity: Price Estimation, prepare Purchase Order Contract and control Purchase Order status.
  9. Preparation of Histogram Man-hours report to compare and control the actual and plan of man-hours.
  10. Prepare Progress Measurement System.
  11. Prepare Project Report (Weekly and Monthly).
  12. Contribute to the change management process, analyzing and reporting schedule and cost impacts to the project.

Required Qualification:

  • Ideally about more than 10 yrs Oil &Gas project experience.
  • Practical extensive experience in planning and scheduling.
  • Expertise on project controls and planning tools such as MS Project, Primavera, etc.
  • Knowledge of spreadsheets and databases.
  • Team player with a willingness to share ideas with multi-disciplinary team members.
  • Good interpersonal, written and oral communication skills.
  • Good numerical, analytical and literacy skills with a strong attention to detail.
  • Possess good planning and organizational skills and be accustomed to meeting tight deadlines.

Interested applicants should submit the application letter and CV to hrd.indo@technip.com with detailed resume and recent photograph; and put the “SR Project Controls Engineer” on the subject email.

TECHNIP is leading provider of Engineering, Technologies and Construction services for oil and gas, petrochemical and other industries.

As part of our business expansion in Indonesia, we are seeking highly qualified professionals to fill in position listed below.

SENIOR PIPELINE ENGINEER – JAKARTA

Job Requirements:

  1. Shall have a minimum of 10 years working experience in Oil and gas Industry for Offshore and Onshore projects.
  2. Shall have a n Engineering Degree (or recognized equivalent).
  3. Should be familiar with International Codes and Standards and common industry practices for design of subsea pipelines, risers and associated facilities.
  4. Should have working experience in various pipeline engineering design activities, including: • Pipeline and riser mechanical design such as thickness, stability, expansion, spanning, collapse, etc. Pipeline, riser and spool stress analysis. • Have a working knowledge of offshore construction and equipment. • Shall have experience in preparation of MTO s, Cost Estimates, schedules, material and equipment specifications and data sheets.
  5. Shall be Computer literate, i.e. shall be able to work on MS Office or equivalent. Experience in the use of AutoPIPE software is preferred. Experience in the use of industry standard software packages would also be an advantage.
  6. Shall possess good communication skills in English language. Previous experience as a Team Leader and Good Team Player, and the ability to work with minimum supervision would be an added advantage.

Interested applicants should submit the application letter and CV to hrd.indo@technip.com with detailed resume and recent photograph; and put the “SR Pipeline Engineer” on the subject email.

PIPELINE

Job Title: PIPELINE ENGINEER
Nationality: Indonesian

Requirements:

  1. Shall have a minimum of 5 years working experience in Oil and gas Industry for Offshore and Onshore projects.
  2. Shall have a n Engineering Degree (or recognized equivalent).
  3. Should be familiar with International Codes and Standards and common industry practices for design of subsea pipelines, risers and associated facilities.
  4. Should have working experience in various pipeline engineering design activities, including: – Pipeline and riser mechanical design such as thickness, stability, expansion, spanning, collapse, etc. – Pipeline, riser and spool stress analysis. – Have a working knowledge of offshore construction and equipment. – Shall have experience in preparation of MTO s, Cost Estimates, schedules, material and equipment specifications and data sheets.
  5. Shall be Computer literate, i.e. shall be able to work on MS Office or equivalent. Experience in the use of AutoPIPE software is preferred. Experience in the use of industry standard software packages would also be an advantage.
  6. Shall possess good communication skills in English language. Previous experience as a Team Leader and Good Team Player, and the ability to work with minimum supervision would be an added advantage.

Interested applicants should submit the application letter and CV to hrd.indo@technip.com with detailed resume and recent photograph; and put the “Pipeline Engineer” on the subject email.

TECHNIP is leading provider of Engineering, Technologies and Construction services for oil and gas, petrochemical and other industries. As part of our business expansion in Indonesia, we are seeking highly qualified professionals to fill in position listed below.

SENIOR PROCESS SAFETY ENGINEER – JAKARTA

Job Requirements:

  1. Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia.
  2. Minimum of 10 years experience in Offshore / Onshore Oil and Gas Engineering, Refining, Petrochemical Engineering/ Operation/ Design and Commissioning Support for Lead Process Safety Engineering.
  3. Shall have good written and spoken English language communication skills.
  4. Should possess hands on experience in handling Process Engineering softwares like PIPENET, FLARESIM etc.
  5. Should be able to perform fire water hydraulic calculations and develop process safety drawings like hazardous area classification with precise knowledge.
  6. Should have analytical knowledge and report writing capabilities.
  7. Should be familiar with international codes and standards applicable for Process Safety Engineering (NFPA, SOLAS, API, IP etc) in Oil and Gas industry.
  8. Should have enough supervisory skill to manage a team of drafters.
  9. Should be able to co-ordinate within the discipline and other disciplines.
  10. Should be a fast learner and a team worker.
  11. Should be able to interact with 3rd party specialist for safety studies.

Interested applicants should submit the application letter and CV to hrd.indo@technip.com with detailed resume and recent photograph; and put the “Sr. Process Safety Engineer” on the subject email.

SENIOR STRUCTURAL ENGINEER – OFFSHORE

Job Requirements:

  • Possess recognized degree in Civil or Structural Engineer.
  • 10 to 15 years experience in Structural analysis and design in Oil and Gas industry offshore platforms.
  • Preferably experience in the use of SACS Software for the design of offshore structures.
  • Experience in both green and brown field will be advantage.
  • Should possess good communication skills in English language.
  • Should hold Indonesia citizenships and ready to be placed in Jakarta or Balikpapan.
  • Should be able to work effectively in team, maintain good quality of work, and possess good analytical skills in problem solving.

Interested applicants should submit the application letter and CV to hrd.indo@technip.com with detailed resume and recent photograph; and put the “Senior Structural Engineer” on the subject email.

SENIOR ELECTRICAL ENGINEER

Job Requirements:

  • Should have an Engineering degree from a recognized university.
  • Should have at least 10 years relevant working experience in an engineering organization of oil and gas industry for Offshore and Onshore projects and/or petrochemical/power plant projects.
  • Should be conversant with electrical engineering analysis software such as ETAP / EDSA for conducting and concluding the various studies (covering Load Flow, Short Circuit, Transient Stability, Motor Starting, Relay Coordination, Harmonic Analysis studies). Having exposure to working in 3D projects utilizing PDS / PDMS would be an added advantage.
  • Should be familiar with International Codes and Standards (NEC, ANSI, IEC, NEMA, etc.).
  • Should have working experiences in various electrical design activities, including but not limited to: – Calculations ( such as Lighting, Earthing and Cable Sizing). – Electrical layout preparation (such as Cable and Cable Tray Layouts, Lighting Layouts, including Layouts etc). – Electrical Bulk Material Take Off (MTOs) and familiar with electrical equipment selection for hazardous area environments (both NEC and IEC).
  • Should have knowledge in computer literate, i.e. MS Office or equivalent. Having experiences on 2D CAD tools such as AutoCAD and/or Microstation, 3D modeling tools (PDS or PDMS) exposure would be preferable and an added advantage. • Should possess good communication skills in English language.
  • Should hold Indonesia citizenships and ready to be placed in Jakarta.
  • Should be able to work effectively in team, maintain good quality of work, and possess good analytical skills in problem solving.

Interested applicants should submit the application letter & CV to hrd.indo@technip.com with detailed resume and recent photograph; and put the “Senior Electrical Engineer” on the subject email.

SENIOR MECHANICAL ENGINEER

Requirements:

  • Should have at least 5 years relevant working experience in an engineering organization of oil and gas industry. Candidate with more than 8 years relevant working experience can be considered as a Senior Mechanical Engineer.
  • Should be a graduate in Mechanical Engineering Degree from a recognized university with a good score of GPA.
  • Should possess good English and able to communicate clearly and efficiently with other parties including other discipline engineers, vendors, client representatives, etc.
  • Team spirit, team play and attitude to learn are essential.
  • Should have knowledge in computer literate, i.e. able to work on Ms Office or equivalent, also familiar with mechanical design software such as Codecalc (PVELITE is preferable).
  • Should be familiar with International Codes such as ASME/ANSI/ASTM/DIN/BS/API etc.
  • Able to design pressure vessels, tanks, columns.
  • Able to review vendor documents, data and drawings.
  • Able to prepare specifications, data sheets and requisitions for static and rotating equipment.
  • Able to prepare technical clarifications, technical bid evaluations and recommendations.
  • Hold Indonesia citizenships and ready to be placed in Jakarta.

Interested applicants should submit the application letter & CV to hrd.indo@technip.com with detailed resume and recent photograph; and put the “Senior Mechanical Engineer” on the subject email.

SENIOR PROCESS ENGINEER

Job Requirements:

  • Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia.
  • Minimum of 10 years experience in Offshore / Onshore Oil and Gas Engineering, Design and Commissioning Support for Lead Process Engineer.
  • Minimum of 7 years experience in Offshore / Onshore Oil and Gas Engineering, Design and Commissioning Support for Senior Process Engineer.
  • Shall have good written and spoken English language communication skills.
  • Shall be able to check and verify the work of junior engineers and provide guidance as required.
  • Should possess hands on experience in handling Process Engineering softwares like HYSYS, PIPESIM etc.
  • Should be able to perform process calculations and develop process drawings with precise knowledge.
  • Should have analytical knowledge and report writing capabilities.
  • Should be familiar with international codes and standards applicable for Process Engineering in Oil and Gas industry.
  • Should have enough supervisory skill to manage a team of engineers and drafters.
  • Should be able to co-ordinate with other disciplines and the client as an effective team worker.

Interested applicants should submit the application letter and CV to hrd.indo@technip.com with detailed resume and recent photograph; and put the “Senior Process Engineer” on the subject email.

PROJECT ENGINEER

Job Requirements:

  • Bachelor degree in Engineering or Equivalent.
  • Preferably registered Professional Engineer.
  • Minimum 8 years post graduate experience in Engineering with at least 5 years in the oil and gas industry.
  • Experience to handle project meeting, project filling and archiving system.
  • Ensure the proper coordination between the Engineering and Procurement disciplines.
  • Ensure the technical coordination between various disciplines which includes document distribution and correspondence.
  • Should possess management skills.
  • Should possess good communication skills.
  • Should be able to work effectively in a team, and maintain good quality of work.

Interested applicants should submit the application letter and CV to hrd.indo@technip.com with detailed resume and recent photograph; and put the “Project Engineer“on the subject email.

24 comments
  1. saya berpengalaman di shipyard selama 10 tahun dalm bidang balsting painting, baik ships repair maupun new building.

  2. Dear Sir or Madam,

    After reading your advertisement, I very much interest to join in your team…

    I have working experience as a engineer in coating system such as painting, lining and plating since 2005.

    Best Regard

    Zami Furqon
    081510104982

  3. 27th,sept2010

    dear sir/madam my name is tri hartanto i would join to this company im interested to supervisor painting i have educated d3 teknical otomotif ppkp yogyakarta experienced in basic painting,machine motor,komputer good well make mal of paint call me at 081378433303 if your company is need some employes to hold some position thank u

    sincerely

    tri hartanto

  4. Sir” My name is Iqbal Iam working petrofac co Abudhabi ASAB Project My previsious companey Chiyoda Technip Qatar QGX Project Blasting & Painting Supervisor field 13years experiance .I interesting to join your company

    Thank you

  5. Dear Sir/Madam

    Regarding information that I got from internet news , that your company looking for Blasting & Painting Inspector.
    My name is Elekson Saragi , My qualification Coating Inspector level I & II INDOCOR/AKN ( National Corrosion Body Expert ) conducted by GIROS Indonesia with ATB Mr Lindung Silalahi NACE ID#3841.
    I have eight ( 8 ) years experienced , in Blasting & Painting project as Painting Inspector & Painting Supervisor. I’ve experience as Painting Supervisor at Kaefer Integrated Services Pte.Ltd. project for EXXON Mobil Chemical ( Singapore Parallel Train ), Location at PT. Mc CONNELL DOWELL Service, Batam Island . Now I’m working at Dry Dock World Graha as Painting Inspector for project L205 and L 206 service jack up rig , For SAIPEM PROJECT.

    Here I attach my CV, Hopefully you can call me as soon as possible , you can contact me at this number : (+62)-813-7228-6076, (+62)-813-7256-7908.

    Yours faithfully

    Elekson Saragi

  6. Dear Sir/madame

    I’m Nofriadi and I got information about your company from internet. I have experience more than 13 years in coating industry and more 9 years in oil & gas.

    I’m NACE CIP Level 2 and interest to join with your company. I can contact me at my mobile +6281289157770

    Best Regard,

    Nofriadi

  7. saya berpengalaman bekerja di bagian insulation of pipe
    hot &cool insulation,saya juga berpengalaman untuk kerja foaming injection,juga saya berpengalaman untuk kerja sprey fire proofing,saya bisa jadi sup.v mengasi orang bekerja,saya bisa jadi insulator,bisa jadi skill pasang metel

  8. asosiasi coresi indonesia painting inspector level 2 INDOCOR
    dan recomandasi PT OIL GAS PREMIER OIL NATUNA

  9. I’ve worked in oil & gas industry during the last 8 years working in Indonesia batam pt mc Dermott fabrication, we work with teams and achieve results that we achieve the target,

    so that I would propose that the father led keperusahaan there any vacancies for me

    best regards
    muh aras arifin
    +6281364628623

  10. my name is muammar 27 years old,have 5 years experienced as painting supervisor and the last occupation is as site manager at coal boiler plant project PKT Bontang Kaltim, ,willingly to placed at any work place.Able to collaborate with other worker ,fast learner and hard worker.understand with nace,iso and astm procedure that related with the works.
    I need your consideration and please contact me if your company required my position at my mobile phone : 087774649749 or 085250055860.

  11. Saya sudah bekerja berpengalaman 20 tahun di bidang insulation hot & cold , duct , boiler . juga bisa fabricator .

  12. saya sepesialis blasting painting yg sudah ber pengalaman selama 6 thn dan telah bekerja d beberapa tempat d luar daerah antara lain ,di batam PT.NANINDAH DRY DOC(GALANGAN KAPAL) ,tanjung pinang,PT.BINTAN KARIMUN(GALANGAN KAPAL) ,surabaya,PT DUTA SARANA PRASADA(WORK SHOP) ,kalsel ,PLTU ASAM-ASAM(CEROBONG PLTU),jambi,PT.PETRO CINA(PIPE LAEN). Mohon bpk/ibu dapat mempertimbangkan nya. untuk saya dapat ber gabung dengan perusahaan yang bpk/ibu pimpin saat ini. Atas perhatianya terimakasih. emal:anggacilegon@rocketmail.com

  13. HAVE TOTAL 27 YEARS EXPERIENCE IN OIL AND GAS PROJECTS AT ON/OFFSHORE PROJECTS AT ON/OFFSHORE MARINE SHIPPING WITH COATING/INSULATION/FIREPROOFING/SCAFFOLDING ACTVITIES

  14. Saya pekerja blasting painting dan pengalaman saya sebagai painting pengalaman saya di shipyard dan di PT.mc dermott saya bekerja di blasting painting selama 10 thn dan terakhir saya bekerja sbg watherjetting atau waterblasting di righ pionner majuro transocean kl ada job infoya rokhimin9@yahoo.com

  15. Saya blasting painting, hydroblasting.pengalaman saya 7 tahun sebagai karyawan di dry dock.di aban offshore singapure , connec emergy singapur.mohon dipertimbangkan
    Trimakasih
    081266718604

Add Comment

Required fields are marked *. Your email address will not be published.